Kitset gabion baskets for curved walls

Gabion1’s US Pricelist

    Gabion walls are cheaper, much stronger and quicker to install than any other rock wall.

Site cut gabions to create a mitre corner detail

You should order gabions 6″ to 12″ longer than needed to allow for variations between drawings and actual site measurements

click for Prices and Sizes info

.

Gabion1 only supply the standard 6 sided kitset flat packed gabions

You will need to site cut these gabions with bolt cutters to make the corner detail, .

click here for retaining wall info

Completed gabion mitre corner detail

To create a curved wall effect you, repeat the mitre on each gabion basket, .

click here for curve examples

Kitset gabion baskets come in 1000’s of different sizes

Once you know the radius of the curve Gabion1 can suggest the best size baskets to achieve a smooth curve

click here for curve examples

gabion fillet detail

Gabion1 can supply the additional panels to create the triangle wedge detail

The radius measurement and gabion basket size will determine the required fillet size

click for Prices and Sizes info

3 panels one helical

A single helical can join 3 sheets of gabion mesh

No need to order extra helicals.

click for Prices and Sizes info

A single helical can join 3 sheets of gabion mesh

No need to order extra helicals.

We hundreds of curved wall set out examples on file,

Please email us your radius and required wall thickness, and we will email setout information

click here for more curve examples

gabion cured radius example

Example of 3″ wide wedge detail, without lid

On outside of curve, wedge panels can be supplied 3″, 6″, 9″, or 12″ wide depending on curve radius

click here to watch how to videos

Example of 75mm wide wedge detail, without lid

On inside of curve.

click for rock size info

Multi-layered curved gabion wall

The basket sizes changed on each row of the gabion retaining wall

click here for curve examples

Curved corner detail

The base and lid need to be hand laced to the vertical panels .

click for rock size info

An example of how to site bend the flat mesh

Curved sides are slightly more time consuming than the triangle wedge solution.

click for rock size info

Example of a double curve setout

Care must be taken to ensure the curves are parallel so the lid fits

click here for curve examples

Double Curve finished wall

The lids and bases were also site curved by gently tapping the mesh with a hammer.

click for rock size info

Close up of site curved gabion lid

The lids are provided square and true by Gabion1, the installer then bends them into shape on site.

click for rock size info

Curved gabion wall with seating

The seating also acts as a lid, and provides a clean finish to the wall.

click here for curve examples

Example of gabion baskets laid out in curve, ready for filling

The full wall is laid out to check the curve, prior to placing rocks..

click for rock size info

Curved wall with stone capping detail

An alternative to timber capping the gabion wall.

click for rock size info

Example of the radius maths, to establish optimum gabion size

Best to do a scale drawing of curved wall, prior to ordering gabions.

click here for curve examples